Sony PZW-4000 Operating Instructions - Page 83

Error display, Alarms relating to external storage, Other alarms

Get Sony PZW-4000 PDF manuals and user guides View all Sony PZW-4000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

08030 8. Appendix: Troubleshooting Alarms relating to external storage Display in status display area USB-A Error! Over DUR!(USB-A) Unknown FS!(USB-A) No FS!(USB-A) Display on monitor screen USB-A DRIVE CANNOT BE RESTORED. PLEASE RESTORE IT USING THE RECORDED EQUIPMENT. EXCESSIVE DURATION IS IN USB-A. CANNOT USE USB-A. UNSUPPORTED FILE SYSTEM. CANNOT USE USB-A. NO FILE SYSTEM. Description/action The external storage must be restored. Restore the external storage using the device used for recording to the external drive. The total recording duration of clips stored in external storage exceeds 24 hours. The external storage cannot be used. The external storage uses an unsupported file system. The external storage cannot be used. The external storage has no formatted file system. The external storage cannot be used. Other alarms Display in status display area Turn off/on POWER!! Display on monitor screen Description/action SYSTEM CONFIGURATION WAS The system configuration was changed. Power off CHANGED. the unit and then power it on again. PLEASE TURN OFF/ON POWER. MENU CONFIG WAS CHANGED. Menu settings were changed. PLEASE TURN OFF/ON POWER. To apply the changed settings, power the unit off and then power it on again. Error display Error codes appear in the status display area when an error (usually a hardware problem) occurs. In addition, error messages and error codes appear on the video monitor connected to the 3G-SDI MONITOR OUTPUT connector. When an error message appears, follow the instructions in the error message to resolve the problem. [Note] If "display off: DISPLAY KEY" appears below the error display, you can press the DISPLAY button to dismiss the error display. In this case, the error is displayed only in the status display area and on the video monitor connected to the unit. Error code Example status display area indication Monitor display example

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
000
8. Appendix: Troubleshooting
83
Alarms relating to external storage
Display in status display
area
Display on monitor screen
Description/action
USB-A Error!
USB-A DRIVE CANNOT BE RESTORED.
PLEASE RESTORE IT USING THE
RECORDED EQUIPMENT.
The external storage must be restored.
Restore the external storage using the
device used for recording to the
external drive.
Over DUR!(USB-A)
EXCESSIVE DURATION IS IN USB-A.
The total recording duration of clips
stored in external storage exceeds 24
hours.
The external storage cannot be used.
Unknown FS!(USB-A)
CANNOT USE USB-A.
UNSUPPORTED FILE SYSTEM.
The external storage uses an
unsupported file system.
The external storage cannot be used.
No FS!(USB-A)
CANNOT USE USB-A.
NO FILE SYSTEM.
The external storage has no formatted
file system.
The external storage cannot be used.
Other alarms
Display in status
display area
Display on monitor screen
Description/action
Turn off/on POWER!!
SYSTEM CONFIGURATION WAS
CHANGED.
PLEASE TURN OFF/ON POWER.
The system configuration was changed. Power off
the unit and then power it on again.
MENU CONFIG WAS CHANGED.
PLEASE TURN OFF/ON POWER.
Menu settings were changed.
To apply the changed settings, power the unit off
and then power it on again.
Error display
Error codes appear in the status display area when
an error (usually a hardware problem) occurs. In
addition, error messages and error codes appear
on the video monitor connected to the 3G-SDI
MONITOR OUTPUT connector.
When an error message appears, follow the
instructions in the error message to resolve the
problem.
[Note]
If “display off: DISPLAY KEY” appears below the error display,
you can press the DISPLAY button to dismiss the error
display. In this case, the error is displayed only in the status
display area and on the video monitor connected to the unit.
Example status display area indication
Error code
Monitor display example