Sony RM-VL1000 Operating Instructions - Page 13

Basic Operations Setting the Code for Preset Audio and Visual Components The Commander is preset at the factory to operate Sony brand AV components (see the table below). If you are using the Commander with a factory-set Sony components, skip the following procedures. You can use the Commander with other preset AV components also. To use with other AV components, you need to follow the following procedures to set the correct codes for each component. Setting a component code COMPO SYSTEM TIMER SCROLL SET POWER REC VIDEO1 VIDEO2 AUX TUNER CD TAPE MD TV PHONO DVD 3 4 2 5 MENU GUIDE Component name on the display TV Preset component TV Factory setting Sony TV SAT Digital Sony digital satellite cable box CABLE DVD VCR1 VCR2 DVR CD AMP MD/DAT TAPE A TAPE B Cable box Cable box DVD player Sony DVD player VCR Sony VHS VCR (VTR3) VCR Sony 8mm VCR (VTR2) Digital video Sony digital recorder video recorder CD player Sony CD player Amplifier Sony amplifier MD deck/ Sony MD deck DAT deck Cassette deck* Sony cassette deck Cassette deck* Sony cassette deck * Analog audio compact cassette deck See "Table of Preset Functions" (page 74) for the functions of keys and buttons as for each component. VOL CH MUTING RECALL Example: To set up a Philips' TV 1 See the tables in the supplied "Component Code Numbers," and find the four-digit code number for the desired component. If more than one code number is listed, use the number that is listed first. For example, to set up a Philips TV, you would use the code number 8056. The first digit of the component code number means the component category (TV, VCR, etc.). For further details, see the tables in the supplied "Component Code Numbers." Continued 13