Sony RM-VLZ620 Operating Instructions - Page 32

Restoring the Factory Settings You can clear all the settings (manufacturer's codes, learned functions, and programmed consecutive procedures), and reset the RM-VLZ620 to its factory settings. If you want to clear the settings for any Device Select button, see page 14. SET/SET indicator 1 Press and hold SET for more than 3 seconds. While keeping SET held down, press , then release both buttons. The SET indicator lights up. 2 Enter 9 - 0 - 0. The Device Select buttons start flashing in sequence. If you want to clear all the settings, go to Step 3. To cancel, press any button except . The SET indicator flashes once and turns off. 3 Press . When all the settings have been 9, 0 cleared, the SET indicator flashes three times and turns off. 3 flashes 32