Sony SLV-N900 Operating Instructions - Page 50

7 DIAL TIMER Press DIAL TIMER. "CH" and "Current channel" appear alternately in the display window. 8 DIAL TIMER Turn DIAL TIMER to set the channel number. To record from a source connected to the LINE IN 1 or LINE-2 IN jacks, turn DIAL TIMER or press INPUT SELECT to display "L1" or "L2." INPUT SELECT 9 DIAL TIMER Press DIAL TIMER to complete the setting. "OK" appears in the display window for about five seconds. The TIMER indicator appears in the display window and the VCR stands by for recording. When using a cable box, leave it on. To return to the previous step To return to the previous step, press the CHANNEL + and - buttons on the VCR at the same time during any of the Dial Timer settings. To stop recording To stop the VCR while recording, press x STOP. To use the VCR after setting the timer To use the VCR before a timer recording begins, just press ?/1. The TIMER indicator disappears from the display window and the VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter (page 44). • Display tape information on the TV screen (page 46). • Check the timer settings (page 63). • Watch another TV program (page 47). 50 Recording TV programs using the Dial Timer