Sony SLV-N900 Operating Instructions - Page 51
Basic Operations, To set the clock
View all Sony SLV-N900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Basic Operations To set the clock 1 Hold down DIAL TIMER so that "MONTH" and "1" appear alternately in the display window. However, if the clock has already been set, the current setting appears. 2 Turn DIAL TIMER to set the month. 3 Press DIAL TIMER. "DAY" and "1" appear alternately in the display window. 4 Turn and press DIAL TIMER to set the day and then the year. After you set the year, "AM" and "12:- -" appear alternately in the display window. 5 Turn and press DIAL TIMER to set the hour and minute. 6 When you have finished setting the time, press DIAL TIMER to start the clock. Tips • To cancel a Dial Timer setting, press x STOP on the VCR while you are making the setting. • The program is recorded in the current tape speed. To change the tape speed, press SP/EP before you complete the setting in step 9 (page 50). • To check, change, or cancel the program setting, see "Checking/changing/canceling timer settings" on page 63. Notes • If eight programs have already been set using the VCR Plus+C3 system or the manual timer setting, "FULL" appears in the display window for about five seconds. • If you set the clock using the Auto Clock Set feature, the clock will adjust itself to the incoming time signal regardless of adjustments made with the Dial Timer. Be sure you have set Auto Clock Set correctly. • If you are setting the clock for the first time or "0:- -" appears in the display window, you cannot set the clock to February 29th using the Dial Timer. Please use the Auto Clock Set feature to set the VCR to this day. • The TIMER indicator flashes in the display window when you complete the setting in step 9 on page 50 with no tape inserted. • When the setting time is incorrect, "ERROR" appears in the display window in step 9. Set the timer again from step 1. • You cannot set the tape speed to "AUTO" using the DIAL TIMER. To select "AUTO," set the "SPD" position in " Timer set/check." continued Recording TV programs using the Dial Timer 51