Sony SLV-N900 Operating Instructions - Page 61
To use the shuttle ring in normal mode, To use the shuttle ring in jog mode
View all Sony SLV-N900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Additional Operations To use the shuttle ring in normal mode During playback or pause, turn the shuttle ring clockwise or anticlockwise. Each change in the shuttle ring position changes the playback mode in the following way. Pause Slow motion in reverse Slow motion Normal speed in reverse Normal speed (Initial speed) Double speed in reverse Double speed High speed in reverse High speed To use the shuttle ring in jog mode Use this mode for frame-by-frame playback. Press JOG to enter the jog mode. The JOG button lights up. If you change to the jog mode during any playback mode, playback pauses so you can see a still picture. Each change in the shuttle ring position shifts the picture one frame. To shift frames in reverse, turn the shuttle ring anticlockwise. The frame shift speed depends on the speed you turn the shuttle ring. To resume normal mode, press JOG again. The JOG button turns off. Tips • Adjust the picture using the TRACKING +/- buttons if: - Streaks appear while playing in slow motion. - The picture shakes during pause. • The VCR turns on and starts playback automatically by pressing H PLAY on the VCR with the VCR power turned off. Notes • The sound is muted during these operations. • Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the picture quality cannot be guaranteed. • The picture may show noise when playing at high speed in reverse. Playing/searching at various speeds 61