Sony STR-DA7ES Operating Instructions - Page 29
Direct tuning
View all Sony STR-DA7ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Amplifier/Tuner Operation Direct tuning Enter a frequency of the station directly by using the remote. For details on the supplied remote, refer to the operating instructions supplied with the remote. STR-DA7ES Use the supplied remote RM-TP1. 1 Touch RM SELECT. The RM SELECT screen appears. 2 Touch AMP. The screen for operiting the receiver appears. 3 Touch TUNER. The receiver swiches to the TUNER input. 4 Touch B to return to the RM SELECT screen. 5 Touch TUNER in the RM SELECT screen. 6 Touch FM/AM to select the FM or AM band. You can also use the FM/AM button on the receiver. 7 Touch b to display screen 2/3. 8 Touch DIRECT. 9 Touch the numeric buttons to enter the frequency. Example 1: FM 102.50 MHz Touch 1 b 0 b 2 b 5 b 0 Example 2: AM 1,350 kHz (You don't have to enter the last "0" when the tuning scale is set to 10 kHz.) Touch 1 b 3 b 5 b 0 If you've tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception. STR-DA4ES Use the supplied remote RM-LP211. 1 Select "TUNER" from the FUNCTION list to switch the function to TUNER. You can also use the FUNCTION control on the receiver. 2 Select "FM/AM" from the SUB menu to select the FM or AM band. You can also use the FM/AM button on the receiver. 3 Select "DIRECT TUNING" from the SUB menu. 4 Select the numbers for the frequency using the NUM menu. Example 1: FM 102.50 MHz Press 1 b 0 b 2 b 5 b 0 Example 2: AM 1,350 kHz (You don't have to enter the last "0" when the tuning scale is set to 10 kHz.) Press 1 b 3 b 5 b 0 If you've tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception. If you cannot tune in a station and the entered numbers flash Make sure you've entered the right frequency. If not, repeat steps 3 and 4. If the entered numbers still flash, the frequency is not used in your area. 29GB