Sony STR-DA7ES Operating Instructions - Page 69

rd room operation

Page 69 highlights

x 3rd room operation Main room 3rd room Operations Using the Remote (STR-DA7ES only) Audio/Video components 3RD ROOM OUT STR-DA7ES IR repeater (not supplied) Speaker Speaker Amplifier IR repeater (not supplied) nN Xx .> mM - + + + - - RM-US105A Using an optional IR repeater as shown above The following operations are possible with the RM-US105A remote: • Switching the output source for the 3RD ROOM OUT jacks. • Adjusting the volume from the 3RD ROOM OUT jacks. • Switching the output to the 3RD ROOM OUT jacks on or off. Set the command mode of the RM-US105A remote to the 3RD ROOM mode. 1 Press USE MODE momentarily. The current command mode button slowly lights up 5 times. 2 While the button blinks, press AV SYSTEM 1 or AV SYSTEM 2 according to the command mode of the reciever in the main room. 3 Press USE MODE momentarily again. 4 Press 3RD ROOM while the button blinks. The command mode has been set to the 3rd room mode. Tip Once steps 1 and 2 are done, the setting is stored in the remote's memory. However, when you change the command mode of the receiver, perform steps 1 to 4 again. continued 69GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

Operations Using the Remote (STR-DA7ES only)
69
GB
3RD
ROOM
OUT
STR-DA7ES
RM-US105A
+
M
m
+
+
>
.
x
X
N
n
x
3rd room operation
IR repeater
(not supplied)
IR repeater
(not supplied)
Audio/Video components
3rd room
Main room
continued
Amplifier
Speaker
Speaker
Using an optional IR repeater as shown above
The following operations are possible with the RM-US105A remote:
Switching the output source for the 3RD ROOM OUT jacks.
Adjusting the volume from the 3RD ROOM OUT jacks.
Switching the output to the 3RD ROOM OUT jacks on or off.
Set the command mode of the RM-US105A remote to the 3RD ROOM mode.
1
Press USE MODE momentarily.
The current command mode button slowly lights up 5 times.
2
While the button blinks, press AV SYSTEM 1 or AV SYSTEM 2 according to the
command mode of the reciever in the main room.
3
Press USE MODE momentarily again.
4
Press 3RD ROOM while the button blinks.
The command mode has been set to the 3rd room mode.
Tip
Once steps 1 and 2 are done, the setting is stored in the remote’s memory. However, when you change the
command mode of the receiver, perform steps 1 to 4 again.