Sony STR-DA7ES Operating Instructions - Page 68

nd room operation

Page 68 highlights

Listening to the sound in another room (continued) x 2nd room operation Main room 2nd room Monitor Audio/Video components 2ND ROOM OUT Speaker Speaker Amplifier STR-DA7ES IR repeater (not supplied) IR repeater (not supplied) nN Xx .> mM - + + + - - RM-US105A Using an optional IR repeater as shown above The following operations are possible with the RM-US105A remote: • Switching the output source for the 2ND ROOM OUT jacks. • Adjusting the volume from the 2ND ROOM OUT jacks. • Switching the output to the 2ND ROOM OUT jacks on or off. Set the command mode of the RM-US105A remote to the 2ND ROOM mode. 1 Press USE MODE momentarily. The current command mode button slowly lights up 5 times. 2 While the button blinks, press AV SYSTEM 1 or AV SYSTEM 2 according to the command mode of the reciever in the main room. 3 Press USE MODE momentarily again. 4 Press 2ND ROOM while the button blinks. The command mode has been set to the 2nd room mode. Tip Once steps 1 and 2 are done, the setting is stored in the remote's memory. However, when you change the command mode of the receiver, perform steps 1 to 4 again. 68GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

68
GB
Listening to the sound in another room (continued)
Amplifier
Monitor
Speaker
Speaker
IR repeater
(not supplied)
IR repeater
(not supplied)
Audio/Video components
2nd room
Main room
x
2nd room operation
2ND
ROOM
OUT
STR-DA7ES
RM-US105A
+
M
m
+
+
>
.
x
X
N
n
Using an optional IR repeater as shown above
The following operations are possible with the RM-US105A remote:
Switching the output source for the 2ND ROOM OUT jacks.
Adjusting the volume from the 2ND ROOM OUT jacks.
Switching the output to the 2ND ROOM OUT jacks on or off.
Set the command mode of the RM-US105A remote to the 2ND ROOM mode.
1
Press USE MODE momentarily.
The current command mode button slowly lights up 5 times.
2
While the button blinks, press AV SYSTEM 1 or AV SYSTEM 2 according to the
command mode of the reciever in the main room.
3
Press USE MODE momentarily again.
4
Press 2ND ROOM while the button blinks.
The command mode has been set to the 2nd room mode.
Tip
Once steps 1 and 2 are done, the setting is stored in the remote’s memory. However, when you change the
command mode of the receiver, perform steps 1 to 4 again.