Sony STR-DE1015G Operating Instructions - Page 24
Dolby, Logic, STR-DE815G, STR-D760Z
View all Sony STR-DE1015G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Dolby Surround Setup Dolby Pro Logic (STR-DE815G and STR-D760Z) Dolby Pro Logic Surround is a decoding system standardized in TV programs and movies. Dolby Pro Logic Surround improves sound image by using four separate channels. These channels manipulate the sound and enhance the action as it happens on the screen. Specifying the center mode To take advantage of Dolby Pro Logic Surround, you should connect at least one pair of rear speakers and/ or one center speaker, plus a TV and a VCR. Also, to enjoy a full effect, you need to select the appropriate center mode (WIDE, NORMAL, PHANTOM, or 3 CH LOGIC modes) on the receiver, according to your speaker system. WIDE mode Select this mode if you have front and rear speakers and a large center speaker. With this mode, you can take full advantage of Dolby Surround sound. Center speaker Front speaker (L) Front speaker (R) )))) Rear speaker (5L) Rear speaker (R) NORMAL mode Select this mode if you have front and rear speakers and a small center speaker. Since a small speaker cannot produce enough bass, the bass sound of the center channel is output from the front speakers. Center speaker Front speaker (L) Front speaker (R) Rear speaker (L) Rear speaker (R) PHANTOM mode Select this mode if you have front and rear speakers but no center speaker. The sound of the center channel is output from the front speakers. Front speaker (L) Front speaker (R) a))))) Rear speaker (L) (((((tDRear speger (R) 3 CH LOGIC mode Select this mode if you have front and center speakers but no rear speakers. The sound of the rear channel is output from the front speakers to let you experience some of the surround sound without using rear speakers. Front speaker (L) Center speaker BrA fe.stel Front speaker (R) Adjusting the speaker volume To enjoy Dolby Pro Logic Surround sound, select the appropriate center mode. Then adjust the volume of each speaker using the test tone that the receiver provides. The test tone feature lets you set the volume of your speakers to the same level. (If all of your speakers have equal performance, you do not have to adjust the speaker volume.) Using the remote lets you adjust the volume level from your listening position. 1 -Click SOUND in the main menu. 2 Click PRO LOGIC, then click SUR. FUNCTION V SOUND \ SETUP PRO LOGIC MOVIE , MUSIC SPORTS GAME MODE) PRO LOGIC SOUND FIELD 0 N OFF BASS BOOST O N OFF DIRECT PASS 0 N OFF TONE SUR I F EXIT 24