Sony STR-DE1015G Operating Instructions - Page 58

Front Panel Operations (Remote Short-cuts: USA and Canada only) Set up parameters (STR-DE815G / D760Z) Center mode Initial setting is : CENTER [NORMAL) See page 24 for details. • DISPLAY set up Dimmer level This setting lets you select brightness of the display on the front panel. • You can select between four different settings. Control Al mode Initial setting is : CTRL Al [AUTO] This setting lets you specify the display mode for Control Al components. • AUTO displays "PLAY", "STOP", "PAUSE" or "REC" for about 8 seconds when the operation switches. • FIX displays "PLAY", "STOP", "PAUSE", "REC" or the contents of a disc or track memo of a CD or MD at all times. • OFF turns off the operation status display. Notes • This setting is only effective when the IR code setting is set to Sony Control Al. • If the disc or track memo contains a character that the receiver cannot display, "." appears for that character. • FUNCTION set up VIDE01, VIDE02, LD/DVD, TV/DBS, TAPE, DAT/MD, CD, PHONO Initial setting is : YES These settings let you delete the names of unconnected components from the function lists. • YES displays the name of the respective component (jacks). • NO deletes the name of the respective component (jacks). Notes • When a function is set to "NO", it cannot be selected. • If an S-LINK signal (Control Al, Control-S) is input to the S-LINK jack from a component whose function was set to "NO", the function will automatically switch to "YES" and that function will be selected. • When using the remote, "NO CONNECTION" is displayed if you select a function that was set to "NO" (USA and Canada only). Indexing Using the index functions, you can specify names up to 8 characters long for each component and preset radio station. For the On-screen operations, see page 43. 1 • For the components Press AUDIO FUNCTION or VIDEO FUNCTION repeatedly to select a component. • For the preset stations Tune in a preset station. 2 Press DPC MODE repeatedly until the INDEX indicator lights up. 3 Create a name using the digital processing control buttons. Press A or V to select a character, and then press > to move the cursor to the next position. The name is stored automatically. To insert a space, press A or V until a blank space appears in the display. The space appears between " and A. If you've made a mistake, press < or > repeatedly until the character you want to change flashes. Then select the right character. 4 Repeat steps 1 to 3 to assign index names to other components or stations. 9 To switch the display Each time you press DISPLAY, the display switches between the index name component name (or frequency) ---. track memo', disc memo". • If the Control-Al display mode is set to "AUTO" or "FIX" when listening to a Control-Al compatible tape or DAT deck, the Control-Al operations are displayed together with the index name and component name. Example: TAP [PLAY] index name [PLAY] *n If the Control-Al display mode is set to "FIX" when listening to a Control-Al compatible CD player or MD deck, you can display the disc memo and track memo information in addition to the Control-Al operations. Example: CD [PLAY] index name [PLAY] disc memo'° track memo" "''Up to 13 characters for CD (15 for MD). *"Up to 14 characters for CD (15 for MD). Note The display mode returns to FREQUENCY automatically when you press TUNING +/ 59