Sony STR-DE1015G Operating Instructions - Page 29
Tuning, Presetting, Radio, Stations
View all Sony STR-DE1015G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Playback/Recording Tuning and Presetting Radio Stations The receiver lets you directly enter a station's frequency using the number buttons (Direct Tuning). You can also tune a station by scanning stations (Automatic Tuning), and by selecting preset stations (Preset Tuning: see page 30). Click FUNCTION in the main menu, then click TUNER. 2 Click FM/AM to select FM or AM, then click SUB. LIST S B USER AM FM 102.50MHz STEREO - 3 Click DIRECT. FUNCTION SOUND SETUP A B C DIRECT FM MODE 5 16 7 8 9 0 REC EDIT E EXIT LIST SUB USER al.) FM/AM FM 102.50MHz STEREO - + 4 Click the number buttons to enter the frequency. Example 1: FM 102.50 MHz 1 i 0 11 2 pee Example 2: AM 1350kHz 1 I. 3 II 5 5 Repeat steps 2 to 4 to receive other stations. 'V If an FM stereo program is noisy "STEREO" flashes next to the frequency. Click FM MODE to change to monaural (MONO) reception. There will be no stereo effect, but the reception will improve. To return to the auto stereo mode, click this icon again. 9 If STEREO" remains off Click FM MODE, even when an FM stereo broadcast is receI V ed . c) If an AM program is noisy Adjust the direction of the AM loop antenna for optimum reception. 9 If you cannot tune in a station and the entered numbers are flashing Make sure you have entered the right frequency. If not, reenter the frequency you want. If the entered numbers still flash, the frequency is not used in your area. 'V If you enter a frequency not covered by the tuning interval The entered value is automatically rounded up or down to the closest covered value. Tuning intervals for Direct Tuning are: FM: 50 kHz intervals AM: 10 kHz intervals (except for Australian and Singaporean models) (to change to 9 kHz intervals, see page 64) 9 kHz intervals '9* To watch FM simulcast TV programs Make sure that you tune in the simulcast program on both the TV (or VCR) and the receiver. Tuning radio stations by scanning stations (Automatic Tuning) 1 Click FUNCTION in the main menu, then click TUNER. 2 Click FM/AM to select FM or AM. LIST) sue I USER co) -A FM 102.50MHz STEREO 3 Click + or -. The frequency indication changes and scanning stops when the receiver tunes in a station. To ccintinue `scanning, click + or - again. Click + for a higher station number; click - for a lower one. When the scanning is finished, the receiver starts scanning again. r_i LIST SUBI I USER FM/AM FM 102.50MHz STEREO (continued) 29