Sony STR DH500 Operating Instructions - Page 25
Playback, Selecting a component - problems
UPC - 027242753556
View all Sony STR DH500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Playback 5 Press V/v repeatedly to select "T. TONE Y". The test tone is output from each speaker in sequence as follows: Front left t Center t Front right t Surround right t Surround left t Subwoofer 6 Adjust the speaker levels and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker. For details, see "Adjusting the level (LEVEL menu)" (page 32). Tips • To adjust the level of all speakers at the same time, press MASTER VOL +/-. You can also use MASTER VOLUME on the receiver. • The adjusted value is shown on the display during adjustment. 7 Repeat steps 1 to 5 to select "T. TONE N". You can also press any input buttons. The test tone turns off. When a test tone is not output from the speakers • The speaker cords may not be connected securely. • The speaker cords may have the short-circuit problem. Note The test tone does not work when ANALOG DIRECT is selected. Playback Selecting a component TV INPUT TV ?/1 SLEEP DMPORT AV ?/1 ?/1 SYSTEM STANDBY VIDEO BD DVD SAT TV SA-CD/CD TUNER V/v/B/b, 2CH A.F.D. MOVIE MUSIC DVD/BD MENU 123 D.SKIP 456 D.TUNING 789 >10/ MEMORY AMP MENU - 0/10 ENTER CLEAR DISPLAY TOOLS/ OPTIONS MUTING TV VOL MASTER VOL RETURN/EXIT MENU/HOME Input buttons AMP MENU MUTING MASTER VOL +/- 1 Press the input button to select a component. You can also use INPUT SELECTOR on the receiver. The selected input appears on the display. continued 25US