Sony STR DH500 Operating Instructions - Page 26

Selected input Components that can [Display] be played back DMPORT [DMPORT] DIGITAL MEDIA PORT adapter connected to the DMPORT jack VIDEO [VIDEO] VCR, etc., connected to the VIDEO jack BD [BD] Blu-ray disc player, etc., connected to the BD jack DVD [DVD] DVD player, etc., connected to the DVD jack SAT [SAT] Satellite tuner, etc., connected to the SAT jack TV [TV] TV, etc. connected to the TV jack SA-CD/CD [SA-CD/CD] Super Audio CD/CD player, etc., connected to the SA-CD/CD jack TUNER Built-in radio tuner [FM or AM band] 2 Turn on the component and start playback. 3 Press MASTER VOL +/- to adjust the volume. You can also use MASTER VOLUME on the receiver. To activate the muting function Press MUTING. The muting function will be canceled when you do the following. • Press MUTING again. • Increase the volume. • Turn off the receiver. To avoid damaging your speakers Before you turn off the receiver, be sure to turn down the volume level. Naming inputs You can enter a name of up to 8 characters for inputs and display it on the receiver's display. This is convenient for labeling the jacks with the names of the connected components. 1 Press the input button to select the input you want to create an index name for. You can also use INPUT SELECTOR on the receiver. 2 Press AMP MENU. "1-LEVEL" appears on the display. 3 Press V/v repeatedly to select "7-SYSTEM". 4 Press menu. or b to enter the 5 Press V/v to select "NAME IN". 6 Press or b to enter the parameter. The cursor flashes and you can select a character. 7 Press V/v to select a character, then press B/b to move the cursor to the next position. If you made a mistake Press B/b until the character you want to change flashes, then press V/v to select the correct character. Tips • You can select the character type as follows by pressing V/v. Alphabet (upper case) t Numbers t Symbols • To enter a blank space, press b without selecting a character. 8 Press . The name you entered is registered. 26US