Sony STR DH500 Operating Instructions - Page 58
Dolby Digital or DTS multi channel, The surround effect cannot - hum
UPC - 027242753556
View all Sony STR DH500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
There is severe hum or noise. • Check that the speakers and components are connected securely. • Check that the connecting cords are away from a transformer or motor, and at least 10 feet away from a TV set or fluorescent light. • Move your audio components away from the TV. • The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol. There is no sound, or only a very lowlevel sound is heard from the center/ surround speakers. • Select a CINEMA STUDIO EX mode (page 42). • Adjust the speaker level (page 24). • Make sure the center/surround speakers are set to either "SMALL" or "LARGE" (page 31). There is no sound from the subwoofer. • Check that the subwoofer is connected correctly and securely. • Make sure you have turned on your subwoofer. • Make sure the subwoofer is set to "YES" (page 31). • There is no sound from the subwoofer depending on the sound field. There is no sound from the speakers of the receiver when you connect the receiver and the playback component via an HDMI connection. • Make sure that you have connected the digital audio jacks on the playback component to the receiver. Then, turn off TV's volume or activate the TV's muting function. The surround effect cannot be obtained. • Make sure the sound field function is on (press MOVIE, or MUSIC). • Sound fields do not function for signals with a sampling frequency of more than 48 kHz. Dolby Digital or DTS multi channel sound is not reproduced. • Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format. • When connecting the DVD player, etc., to the digital input jacks of this receiver, check the audio setting (the settings for the audio output) of the connected component. Recording cannot be carried out. • Check that the components are connected correctly (page 17). • Select the source component using the input buttons (page 25). There is no sound from the component connected to the DIGITAL MEDIA PORT adapter. • Adjust the volume of this receiver. • The DIGITAL MEDIA PORT adapter and/or component is not connected correctly. Turn off the receiver, then reconnect the DIGITAL MEDIA PORT adapter and/or component. • Check the DIGITAL MEDIA PORT adapter and/or component device to make sure it supports this receiver. 58US