Sony STR DH500 Operating Instructions - Page 7

About the indicators on the display 12 3 4 SW LFE LCR SL S SR OPT HDMI DTS COAX 5 56 MEMORY PLI I D.RANGE MONO SLEEP ST D q; 9 8 7 Name A SW B LFE C Input indicators Function Lights up when subwoofer selection is set to "YES" (page 36) and the audio signal is output from the SUBWOOFER jack. Lights up when the disc being played back contains an LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. Light up to indicate the current input. OPT COAX HDMI Lights up when BD input is selected. However, "NO INPUT" appears on the display if no digital signal is input through the OPTICAL jack. "OPT" also lights up when SAT input is selected if INPUT MODE is set to "AUTO" and the source signal is a digital signal being input through the OPTICAL jack. Lights up when DVD input is selected. However, "NO INPUT" appears on the display if no digital signal is input through the COAXIAL jack. Lights up when the receiver recognizes a component connected via an HDMI IN jack (page 18). Name D DTS E Tuning indicators MEMORY MONO ST Function Lights up when the receiver is decoding DTS signals. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is set to "AUTO" (page 49). Lights up when using the receiver to tune in radio stations (page 45), etc. A memory function, such as Preset Memory (page 47), etc., is activated. Monaural broadcast Stereo broadcast A preset station number appears when the preset radio station is selected. Note The preset station number will change according to the preset station you select. For details on presetting radio stations, see page 47. continued 7US