Sony TA-E1000ESD Primary User Manual - Page 15
Selecting, Logic, Dolby, Surround, Adjusting, Speaker, Volume
View all Sony TA-E1000ESD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Selecting the Pro Logic Mode (for Dolby Surround Mode) In the Dolby surround mode, a speaker operation mode can be selected to match your speaker system. Press PRO LOGIC MODE to select the appropriate mode: NORMAL WIDE PHANTOM 3ch LOGIC CENTER OFF Select this mode if you use a small center speaker. The bass sound of the center channel is output from the front speakers, as a small speaker cannot produce enough bass. Select this mode if you use a medium to big center speaker. Select this mode when you play back a Dolby surround program source without using a center speaker. Select this mode when you playback a Dolby surround program source only with the front and center speakers. This mode is only used for adjusting the input balance in Dolby surround mode (refer to page 18). Adjusting the Speaker Volume To enjoy the surround sound to the maximum on playing any program sources, adjust the front, rear, and center (if connected) speakers to the same volume level. The adjustment must be done with a test tone in the Dolby Sequence of the test tone In a system with a center speaker front left ■ C center front right C surround mode, but the level once adjusted can be used for all surround modes. You can adjust the volume level from your listening position if you use the remote commander. In a system without a center speaker front left and right C C C rear left and right rear left and r€ght 15