Sony TA-E1000ESD Primary User Manual - Page 37
reverberative
View all Sony TA-E1000ESD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Reverberataitonet. The reverberation density parameter adjusts the density (number of responses) of the reverberation to obtain natural reverberation for various program sources. Usually set this parameter to Mid. When the program source itself is very reverberative, like a live recording, set it to Low, Set it to High when the program source is not reverberative. Level Low Level Reverberation Mid Level Reverberation High Reverberation Time Time Time The spread parameter adjusts the delay time of the responses in reverberation from the left and right channels to simulate the width of the soundfield. The standard is designated as 1, and the spread is adjustable from 0.5 to 2.0. The higher the number set, the wider the soundfield. Level Reverberation The delay time of responses can be independently adjusted in the left and right channels. > Time 37