Sony VPL-FHZ65 Operating Instructions - Page 20
Correcting Image Twist (Warp Correction Feature), When correcting the corners of, the image
View all Sony VPL-FHZ65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3 Adjust the value using B/b. The higher the setting, the narrower the right side of the projected image. The lower the setting, the narrower the left side of the projected image. 2 Select "Warping." The guide is displayed. Increase the setting Decrease setting Press the RESET key to restore the projected image before adjustment.*1 Notes *1: The setting may not be reset depending on the combination of adjustment values of the Screen Fitting setting items. In this case, reset all of the Screen Fitting setting items. • Keystone adjustment is an electronic correction. Consequently the image quality may deteriorate. • Depending on the position adjusted with the lens shift feature, using the Keystone feature may change the aspect ratio of the original image, or the projected image may be distorted. Correcting Image Twist (Warp Correction Feature) You can correct image twist with the warp correction feature. 1 Press the KEYSTONE key on the Remote Commander once or select "Screen Fitting" in the Installation menu (page 36). The "Screen Fitting" menu is displayed. When correcting the corner(s) of the image 1 Move x using V/v/B/b to select the corner you want to correct. 2 Press the ENTER key. The cursor appears. Adjust using this cursor 3 Adjust the position of the corner you want to correct, using V/v/B/b. Press the RESET key to restore the projected image before adjustment.*1 20