Sony VPL-FHZ65 Operating Instructions - Page 50
Warning indicators and remedies, If the problem still persists, consult with qualified Sony personnel.
View all Sony VPL-FHZ65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Warning indicators and remedies Indicator status The number of Meaning flashes Remedies Twice The side cover or air Check how the side cover or filter is not installed air filter is attached and securely. install it securely. (Lights (Flashes Three times in red) in red) The light source does not light properly. Unplug the AC power cord and make sure the ON/ STANDBY indicator turns off, then plug the AC power cord into the wall outlet and turn on the projector. Six times Eight times Twice (Flashes (Flashes in red) in red) Both indicators flash A strong shock to the projector is detected. If there is no visible abnormality, unplug the AC power cord and make sure the ON/STANDBY indicator turns off, then plug the AC power cord into the wall outlet and turn on the projector. The lens is not securely attached. Check how the lens is attached and install it securely. The temperature in the projector is abnormal. • Check if the air filter is clogged, then clean or replace it (page 54). • Check if the ventilation holes (intake/exhaust) are not blocked by the wall or an object and secure a sufficient gap. • Check the ambient temperature and use the projector within the range of operating temperature. If the indicators flash in a manner other than described above, unplug the AC power cord and make sure the ON/STANDBY indicator turns off, then plug the AC power cord into the wall outlet and turn on the projector. If the problem still persists, consult with qualified Sony personnel. 50