Sony VPL-FHZ65 Operating Instructions - Page 55

Replacing the Projection Lens, Removing

Get Sony VPL-FHZ65 PDF manuals and user guides View all Sony VPL-FHZ65 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

6 Clean the air filter with a vacuum cleaner. 7 Replace the air filter and attach the filter cover. When attaching the filter cover, fit the two tabs on the right into place, turn the filter cover using the right side as an axis, and fit the two tabs on the left into place. Then, tighten the four screws. Tabs Tabs 8 Fit the two tabs on the side cover into place and slide the side cover upward. Tabs 9 Lock the side cover. Note Be sure to attach the air filter firmly; the power cannot be turned on if it is not attached securely. Replacing the Projection Lens Notes • Avoid removing/attaching the lens with the projector installed suspended from a ceiling. • For usable projection lenses, see "Optional accessories" (page 60). • Do not attach any lens other than the specified accessory lens sold separately. • Be careful not to drop the projection lens. • Avoid touching the lens surface. Removing 1 Return the projection lens to the center position. While the unit is turned on, press the LENS SHIFT button on the Remote Commander, then press the RESET button on it. The projection lens returns to the center position. Note The projection lens cannot be removed unless it has returned to the center position. 2 Turn off the projector, then unplug the AC power cord from the wall outlet. Caution When replacing the lens, your eyes may be damaged if a strong light accidently gets into your eyes. Before replacing the lens, turn off the projector and then unplug the AC power cord. 3 While pressing and holding down the LENS RELEASE button, rotate the 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
55
6
Clean the air filter with a vacuum
cleaner.
7
Replace the air filter and attach the
filter cover.
When attaching the filter cover, fit the
two tabs on the right into place, turn the
filter cover using the right side as an
axis, and fit the two tabs on the left into
place. Then, tighten the four screws.
8
Fit the two tabs on the side cover into
place and slide the side cover upward.
9
Lock the side cover.
Be sure to attach the air filter firmly; the power
cannot be turned on if it is not attached
securely.
Replacing the
Projection Lens
•
Avoid removing/attaching the lens with the
projector installed suspended from a ceiling.
•
For usable projection lenses, see “Optional
accessories” (page 60).
•
Do not attach any lens other than the
specified accessory lens sold separately.
•
Be careful not to drop the projection lens.
•
Avoid touching the lens surface.
1
Return the projection lens to the center
position.
While the unit is turned on, press the
LENS SHIFT button on the Remote
Commander, then press the RESET
button on it. The projection lens returns
to the center position.
The projection lens cannot be removed
unless it has returned to the center position.
2
Turn off the projector, then unplug the
AC power cord from the wall outlet.
When replacing the lens, your eyes may
be damaged if a strong light accidently
gets into your eyes. Before replacing the
lens, turn off the projector and then
unplug the AC power cord.
3
While pressing and holding down the
LENS RELEASE button, rotate the
Note
Tabs
Tabs
Tabs
Notes
Removing
Note
Caution