Sony VPL-FHZ65 Operating Instructions - Page 41
Network, Using Network Features, Displaying the Control Window of the Projector with a Web Browser
View all Sony VPL-FHZ65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
B Network Using Network Features Connection to the network allows you to operate the following features: • Checking the current status of the projector via a Web browser. • Remotely controlling the projector via a Web browser. • Receiving the e-mail report for the projector. • Making the network settings for the projector. • Supports network monitoring and control protocol (Advertisement, ADCP, PJ Talk, PJ Link, SNMP, AMX DDDP [Dynamic Device Discovery Protocol], Crestron RoomView). Notes • When connecting this projector with the network, consult with the network administrator. The network must be secured. • When using this projector connected with the network, access the control window via a Web browser and change the access limitation of the factory preset values (page 42). It is recommended to change the password regularly. • When the setting on the Web browser is completed, close the Web browser to log out. • The menu displays used for the explanation below may be different depending on the model you are using. • Supported Web browsers are Internet Explorer and Safari. • The menu displays only English. • If the browser of your computer is set to [Use a proxy server] when you have access to the projector from your computer, click the check mark to set accessing without using a proxy server. • SNMP, AMX DDDP, and Crestron RoomView do not support IPv6. Displaying the Control Window of the Projector with a Web Browser 1 Connect the LAN cable (page 13). 2 Set the network settings for the projector using "Network Setting" on the Connection/Power menu (page 34). 3 Start a web browser on the computer, enter the following in the address field, then press the Enter key on your computer. http://xxx.xxx.xxx.xxx (xxx.xxx.xxx.xxx: IP address for the projector) When connecting with IPv6 addresses http://[xxxx:xxxx:••• xxxx] You can confirm the IP address of the projector under "Network Setting" on the Connection/Power menu (page 34). The following window appears in the Web browser: Note The screen is a sample. It may differ depending on your model. Once you make the network settings, you can open the control window only by performing step 3 of this procedure. How to operate the control window Switching the page Click one of the Page Switching buttons to display the desired setting page. Page Switching buttons 41