Sony VPL-FHZ700L Startup Guide - Page 30
On cleaning the lens and the cabinet, On Illumination, On Screen, Set Installation Attitude on
View all Sony VPL-FHZ700L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
• Avoid using the unit in a location where the temperature or humidity is very high, or temperature is very low. • Avoid installing the unit in a location subject to direct cool or warm air from an air-conditioner. Installing in such a location may cause malfunction of the unit due to moisture condensation or rise in temperature. • Avoid installing the unit in a location near a heat or smoke sensor. Installing in such a location may cause malfunction of the sensor. • Avoid installing the unit in a very dusty or extremely smoky environment. Otherwise, the air filter will become obstructed, and this may cause a malfunction of the unit or damage it. • When using the unit at an altitude of 1,500 m or higher, set "High Altitude Mode" to "On" in the Installation menu. Failing to set this mode when using the unit at high altitudes could have adverse effects, such as reducing the reliability of certain components. • Set "Installation Attitude" on the Installation menu correctly to suit to the 8 GB Precautions Installation angle. Continuing to use the wrong setting may affect component reliability. On cleaning the lens and the cabinet • Be sure to disconnect the AC power cord from the AC outlet before cleaning. • If you rub on the unit with a stained cloth, the cabinet may be scratched. • If the unit is exposed to volatile materials such as insecticide, or the unit is in contact with a rubber or vinyl resin product for a long period of time, the unit may deteriorate or the coating may come off. • Do not touch the lens with bare hands. • On cleaning the lens surface: Wipe the lens gently-with a soft cloth, such as a glass cleaning cloth. Stubborn stains may be removed with a soft cloth lightly dampened with water. Never use solvent such as alcohol, benzene or thinner, or acid, alkaline or abrasive detergent, or a chemical cleaning cloth. • On cleaning the cabinet: Clean the cabinet gently with a soft cloth. Stubborn stains may be removed with a soft cloth lightly dampened with mild detergent solution and wrung, followed by wiping with a soft dry cloth. Never use solvent such as alcohol, benzene or thinner, or acid, alkaline or abrasive detergent, or a chemical cleaning cloth. On Illumination To obtain the best picture, the front of the screen should not be exposed to direct lighting or sunlight. On Screen When using a screen with an uneven surface, stripes pattern may rarely appear on the screen depending on the distance between the screen and the unit or the zooming magnifications. This is not a malfunction of the unit.