Sony VPL-FHZ700L Startup Guide - Page 35
Selecting the Menu Language
View all Sony VPL-FHZ700L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Selecting the Menu Language The factory setting for the language for displaying menus, messages, etc. is English. To change the on-screen language, proceed as follows: MENU 1 Plug the AC power cord into a wall outlet. 2 Turn on the projector. Press the ?/1 key on the main unit or the ? key on the Remote Commander. 3 Press the MENU key to display the menu. If the display cannot be properly seen, adjust the focus, size, and position of the projected image (page 15). 4 Select the menu language. 1 Press the V or v key to select the Operation ( ) menu then press the ENTER key. 2 Press the V or v key to select "Language ( )" then press the ENTER key. Operation Language Menu Position Status IR Receiver ID Mode Security Lock Panel Key Lock Lens Control EnglishReset Bottom Left On Front & Rear All Off Off On Sel Set Back 3 Press the V/v/B/b key to select a language, then press the ENTER key. 5 Press the MENU key to turn off the menu screen. 13 Selecting the Menu Language GB