Sony VPL-FHZ700L Startup Guide - Page 33
Installing Batteries, Using the Cable Ties, When you remove the cable tie
View all Sony VPL-FHZ700L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
1 Open the index.html file in the CD- ROM. 2 Select and click on the manual that you want to read. Note If you have lost or damaged the CD-ROM, you can purchase a new one from your Sony dealer or Sony service counter. Installing Batteries Two size AA (R6) batteries are supplied for RM-PJ27 Remote Commander. To avoid risk of explosion, use size AA (R6) manganese or alkaline batteries. 1 Remove the lid, then install the two AA (R6) batteries (supplied) with the correct polarity. While pressing the lid, slide it. Be sure to install the battery from the # side. Using the Cable Ties 1 Aim the supplied cable tie in a horizontal direction with respect to the front face of the projector then insert the cable tie through the hole at the bottom. Be sure to insert the cable tie in fully until it clicks. Cable tie Hole of bottom Front direction of the projector 2 Bundle the cables and cords with attached cable tie. When you remove the cable tie Rotate 90 degrees the cable tie. 2 Replace the lid. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. When you dispose of the battery, you must obey the law in the relative area or country. 11 Checking the Supplied Accessories GB