Sony VPL-FHZ700L Startup Guide - Page 39
Indicators, ON/STANDBY indicator, WARNING indicator
View all Sony VPL-FHZ700L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Indicators The indicators allow checking the status and notify you of abnormal operation of the projector. If the projector exhibits abnormal status, address the problem in accordance with the table below. ON/STANDBY indicator Status Lights in red Flashes in green Lights in green Lights in orange Flashes in red Flashes twice Flashes six times Other number of flashes Meaning/Remedies The projector is in standby mode. • The projector is ready to operate after having been turned on. • The light source cools after the projector is turned off. The projector's power is on. The projector is in With No Input (Light Cutoff), or Quick Reboot standby mode. The projector is in abnormal status. Symptoms are indicated by number of flashes. Address the problem in accordance with the following. If the symptom is shown again, consult with qualified Sony personnel. The internal temperature is unusually high. Check the items below. • Check to see if nothing is blocking the ventilation holes. • Check to see if the air filter is not clogged. • Check if "Installation Attitude" on the Installation menu is correctly selected. Unplug the AC power cord from a wall outlet. After checking that the ON/STANDBY indicator goes out, plug the power cord to a wall outlet again then turn on the projector. Consult with qualified Sony personnel. WARNING indicator Status Meaning/Remedies Flashes in red Symptoms are indicated by number of flashes. Address the problem in accordance with the following. Flashes twice The air filter units are not attached securely. Flashes three times The light source does not light. Turn off the power and consult with qualified Sony personnel. Flashes six times The lens is not mounted on the projector. Flashes eight times Drop impact has been detected. If you detect an abnormal condition, consult with qualified Sony personnel. If no abnormality is detected, unplug the AC power cord from a wall outlet. After checking that the ON/STANDBY indicator goes out, plug the power cord to a wall outlet again then turn on the projector. Indicators 17 GB