Sony WX-4500X Operating Instructions - Page 15
Receiving the stored stations, Storing only the desired stations, IF Auto function - stereo
![]() |
View all Sony WX-4500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Receiving the stored stations 1 Press (SOURCE) repeatedly to select the radio. 2 Press (MODE) repeatedly to select the band. 3 Push the jog roller. 4 Rotate the jog roller until you find the desired station. 5 Push the jog roller to tune in the desired station. Tip Press (DISC/PRESET -) or (DISC/PRESET +) on the card remote commander to receive the stations in the order they are stored in memory (Preset Search function). If preset tuning does not work Press (SEEK/AMS -) or (SEEK/AMS +) to search for the station (automatic tuning). Scanning stops when the unit receives a station. Repeat until the desired station is received. Tips • If automatic tuning stops too frequently, turn on the Local Seek to limit seek to stations with stronger signals (see "Changing the sound and display settings" on page 19). • If you know the frequency of the station you want to listen to, press and hold (SEEK/AMS -) or (SEEK/AMS +) to locate the approximate frequency, then press (SEEK/AMS) repeatedly to fine adjust to the desired frequency (manual tuning). If FM stereo reception is poor Select monaural reception mode. (see "Changing the sound and display settings" on page 19). The sound improves, but becomes monaural ("ST" disappears). Tip If FM broadcasts are difficult to hear, set DSO to off. Automatic reception frequency adjustment - IF Auto function While receiving FM stereo, interference from a nearby station may make listening difficult. In such cases, the "IF Auto" function of this unit will automatically narrow the reception frequency to eliminate noise. For this reason, some FM stereo broadcasts may become monaural. If you would like to hear such broadcasts in stereo, manually switch to the "Wide" setting. 1 During FM radio reception, press (MENU). 2 Rotate the jog roller until "IF Auto" appears. 3 Press (SEEK/AMS +) to select "Wide." 4 Push the jog roller. Note Return to the "IF Auto" setting from the "Wide" setting if interference makes FM stereo difficult to listen to. Storing only the desired stations You can manually preset the desired stations. 1 Press (SOURCE) repeatedly to select the radio. 2 Press (MODE) repeatedly to select the band. 3 Press (SEEK/AMS -) or (SEEK/AMS +) to tune in the station that you want to store. 4 Push the jog roller. 5 Rotate the jog roller to select the stored number. 6 Push the jog roller for 2 seconds until "Memory" appears. The stored station indication appears in the display. Note If you try to store another station on the same stored number, the previously stored station will be erased. 15
![](/manual_guide/products/sony-wx4500x-operating-instructions-6032951/15.png)