Sony WX-4500X Operating Instructions - Page 18
By rotating the control, By pushing in and rotating the control, Changing the operative direction
![]() |
View all Sony WX-4500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
*1 Only if the corresponding optional equipment is connected. *2 If your car has no ACC (accessory) position on the ignition key switch, be sure to press (OFF) for 2 seconds to turn off the clock indication after turning off the ignition. By rotating the control Changing the operative direction The operative direction of controls is factory-set as shown below. To increase SEEK/AMS control To decrease If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. Rotate and release to: - Skip tracks on the disc. - Locate the beginning of tracks on the tape. - Tune in stations automatically. Rotate, hold, and release to: - Fast-forward/reverse a track. - Fast-wind the tape. - Find a station manually. Tip To start playback while fast-winding the tape, press (MODE). By pushing in and rotating the control Press (SOUND) for 2 seconds while pushing the VOL control. Tip You can also change the operative direction of these controls with the unit (see "Changing the sound and display settings" on page 19). PRESET/ DISC control Push in and rotate the control to: - Receive preset stations. - Change the disc*. * When an optional CD/MD unit is connected. 18
![](/manual_guide/products/sony-wx4500x-operating-instructions-6032951/18.png)