Sony WX-4500X Operating Instructions - Page 8
Notes on Cassettes, Getting Started, Resetting the unit - cd
View all Sony WX-4500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Notes on Cassettes Cassette care • Do not touch the tape surface of a cassette, as any dirt or dust will contaminate the heads. • Keep cassettes away from equipment with built-in magnets such as speakers and amplifiers, as erasure or distortion on the recorded tape could occur. • Do not expose cassettes to direct sunlight, extremely cold temperatures, or moisture. • Slack in the tape may cause the tape to be caught in the machine. Before you insert the tape, use a pencil or similar object to turn the reel and take up any slack. Slack • Distorted cassettes and loose labels can cause problems when inserting or ejecting tapes. Remove or replace loose labels. • The sound may become distorted while playing the cassette. The cassette player head should be cleaned after each 50 hours of use. The use of cassettes longer than 90 minutes is not recommended except for long continuous play The tape used for these cassettes is very thin and tends to stretch easily. Frequent playing and stopping of these tapes may cause them to become entangled in the cassette deck mechanism. Getting Started Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Press the reset button with a pointed object, such as a ball-point pen. CD DSO SCRL OFF SA SOUND MENU SEEK/AMS EQ7 DSPL AT T MD SEEK/AMS MODE SOURCE Reset button Notes • Pressing the reset button will erase the clock setting and some stored contents. • When you connect the power supply cord to the unit or reset the unit, wait for about 10 seconds before you insert a CD or cassette. If you insert a CD or cassette within these 10 seconds, the unit will not be reset, and you will have to press the reset button again. • When you press the reset button or (OFF), the demonstration display will appear in the display. To deactivate the demonstration display, set the Motion Display mode to off (page 19). 8