Sony WX-4500X Operating Instructions - Page 21
Adjusting the front and rear volume - installation
View all Sony WX-4500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Adjusting the equalizer curve You can store and adjust the equalizer settings for frequency and level. 1 Press (SOURCE) to select a source (radio, CD, MD, or tape). 2 Press (MENU), then rotate the jog roller until "EQ Tune" appears. 3 Push the jog roller. 4 Press (SEEK/AMS -) or (SEEK/AMS +) to select the desired equalizer curve, then push the jog roller. Each time you press (SEEK/AMS), the item changes. 5 Select the desired frequency and level. 1 Press (SEEK/AMS -) or (SEEK/AMS +) to select the desired frequency. Each time you press (SEEK/AMS), the frequency changes. 62 Hz y 157 Hz y 396 Hz y 1.0 kHz y 2.5 kHz y 6.3 kHz y 16 kHz 2 Rotate the jog roller to adjust the desired level. The level is adjustable by 1 dB steps from -10 dB to +10 dB. To restore the factory-set equalizer curve, push the jog roller for 2 seconds. 6 Push the jog roller. When the effect setting is complete, the normal playback mode appears. Level Adjusting the front and rear volume 1 During playback or radio reception, press (SOUND) repeatedly until "FAD" appears. 2 Press (SEEK/AMS -) or (SEEK/AMS +) to adjust the volume of front/rear speakers. After 3 seconds, the display returns to normal playback mode. Adjusting the cut-off frequency for the front/rear speakers To match the characteristics of the installed speaker system, you can select the cut-off frequency of the speakers. Cut-off frequency off Frequency (Hz) 1 During playback or radio reception, press (MENU). 2 Rotate the jog roller until "HPF" appears. 3 Press (SEEK/AMS -) or (SEEK/AMS +) to select the cut-off frequency. Each time you press (SEEK/AMS), the frequency changes as follows: off (default setting) y 78 Hz y 125 Hz 4 Push the jog roller. After the frequency setting is complete, the display returns to normal playback mode. 21