Stihl 036 QS Instruction Manual - Page 35
Move Master Control lever
![]() |
View all Stihl 036 QS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
STOP 0 5 3 4 •As soon as the engine runs: Blip the throttle trigger to disengage it from starting throttle position Master Control lever will move to normal operating position engine settles down to ide speed. • Open throttle slightly • warm up engine for short period. Change over to winter operation if necessary see chapter "Winter Operation". 143BA021 KN 143BA012 KN When engine begins to fire: • Move Master Control lever • to and continue cranking. As soon as engine runs, blip the throttle trigger so that the Master Control lever moves to the normal operating position and the engine returns to idle speed. As the chain brake is still engaged, the engine must be returned to idle speed immediately to avoid damage to the engine and chain drive (clutch). Press down the interlock lever. •• Immediately pull the hand guard back toward the front handle: the chain brake is now disengaged your saw is ready for operation. Observe safety precautions. •• Check chain lubrication before starting work. • Move Master Control lever to Always disengage the chain brake before opening the throttle. Running the engine at higher revs with the chain brake engaged (saw chain at a standstill) will quickly damage the engine and chain drive (clutch, chain brake).
![](/manual_guide/products/stihl-036-qs-instruction-manual-1b2b604/35.png)