Stihl 036 QS Instruction Manual - Page 51
Shflilfdwlrqv
View all Stihl 036 QS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
STIHL single cylinder two-stroke engine Displaceent: 61.5cm3(3.75cu.in) Bore: 48 mm (1.89 in) Stroke: 34 mm (1.34 in) Idle speed: 2,800 rpm Type: Electronic magneto ignition (breakerless) Spark plug (suppressed): Bosch WSR 6 F, NGK BPMR 7 A or Champion RCJ 6 Y Electrode gap 0.5 mm (0.02 in) Spark plug thread: M 14x1.25; 9.5 mm (0.37 in) long Carburetor: All position diaphragm carburetor with integral fuel pump Air filter: Prefilter and bisectional box filter Fuel tank capacitiy: 0.625 L (1.32 US pt) Fuel mixture: see chapter "Fuel" Dry, without bar and chain: 5.8 kg (13.2 lb) Chain lubrication: Fully automatic, speed-controlled rotary oil pump. Additional manual oil flow control Oil tank capacity: 0.32 l (0.68 US pt) Recommended cutting attachments for compliance with § 5.12 of ANSI Standard B 175.1-1991 (see page 14 of this Manual): STIHL reduced kickback bar (with green label): for 3/8" pitch: Rollomatic with sprocket nose 40, 45 or 50 cm (16, 18 or 20 in) STIHL low kickback chain* (with green label): 9.32 mm (3/8") Rapid-Micro 2 (33 RM 2, 36 RM 2) Chain sprocket: 7-tooth for 3/8" pitch spur sprocket Since new bar/chain combinations may be developed after publication of this Manual, ask your STIHL dealer for the latest STIHL recommendations. Other bars and chains available for this powerhead are: STIHL yellow-labeled bars: for 3/8" pitch: Rollomatic "S" with sprocket nose 40, 45, 50, 63 cm (16, 18, 20, 24 in) Duromatic with stellite tipped nose 40, 45, 50 or 63 cm (16, 18, 20 or 24 in) STIHL yellow -labeled chains: for 3/8" pitch: Rapid-Micro (33 RM, 36 RM), Rapid-Super (33 RS, 36 RS, 33 RSL, Rapid-Duro 33 RD). In order to comply with the kickback performance requirements of § 5.12 of ANSI Standard B 175.1-1991, do not use replacement saw chain unless it has been designated as meeting the ANSI § 5.12 requirements on this specific powerhead, or has been designated as "low kickback" saw chain* in accordance with the ANSI B 175.1-1991 standard. *See definition of "low kickback chain" on page 16 of this Manual.