Stihl 036 QS Instruction Manual - Page 50

before starting work after finishing work or daily after each refueling stop weekly monthly if problem if damaged as required see page: Please note that the following maintenance intervals apply for normal operating conditions only. If your daily working time is longer than normal or cutting conditions are difficult (very dusty work area, tropical hardwood, etc.) shorten the specified intervals accordingly. Complete machine Visual inspection (condition, leaks) Clean Throttle trigger, throttle trigger interlock, Master Control Check operation Chain brake Check operation Have cleaned and serviced by STIHL dealer Filter in fuel tank Check Clean, replace filter element Fuel tank Clean Chain oil tank Clean Chain lubrication Check Inspect, also check sharpness Saw chain Check chain tension Sharpen Check (wear, damage) Guide bar Clean and turn over Deburr Replace Chain sprocket Check Air filter Clean Replace Cooling inlets Clean Cylinder fins Clean Carburetor Check idle adjustment - chain must not turn Readjust idle Spark plug Readjust electrode gap All accessible screws and nuts * (not adjusting screws)* Retighten Rubber vibration buffers Have replaced by STIHL dealer Spark arresting screen in muffler Inspect Clean or replace Chain catcher Check Replace * Tighten down the cylinder base screws firmly after the first 10 to 20 hours of operation. x x x x x x x 29-30 x 29-30 x x 28 x x x 34 x x 45 x x 26 x 45 x 38 x x 38 x xx x 44 x x 36 x x x x x 39 x 39 x 40 x x x 40 x 40 x x