Stihl 036 QS Instruction Manual - Page 44
Hqvlrqlqj´uhzlqg´vsulqj´
![]() |
View all Stihl 036 QS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
7 6 5 5 001BA004 K 001BA005 K 001BA006 K • Thread the rope through the rotor and secure it with a simple overhand knot. • Coat rope rotor bearing bore with • non-resinous oil. Slide rotor onto starter post turn it back and forth so that anchor loop of rewind spring engages. Refit the pawls in the rotor. •• Fit the washer on the starter • post. Use screwdriver or suitable pliers to install spring clip on starter post and over the pawl pegs the spring clip must point in clockwise direction - see illustration. • Make a loop in the starter rope and use it to turn the rope rotor six full revolutions in the direction of the arrow. • Hold the rotor steady - straighten the twisted rope. Release the rotor. •• Let go of rope slowly so that it • winds onto the rotor. The starter grip must sit firmly in the rope guide bush. If the grip droops to one side: Increase spring tension by one additional turn.
![](/manual_guide/products/stihl-036-qs-instruction-manual-1b2b604/44.png)