Stihl 036 QS Instruction Manual - Page 45
see Replacing Starter Rope.
View all Stihl 036 QS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
8 • When starter rope is fully extended it must be possible to rotate the rotor at least another half turn. If this is not the possible, the spring is overtensioned and could break. Take off one turn of the rope. • Fit the fan housing on the • crankcase. Set the Master Control lever to • Push the remaining rope into the starter grip so that the nipple is flush with the grip. 001BA007 K • Lubricate the new spring with a few drops of non-resinous oil. • Remove the rope rotor• see "Replacing Starter Rope". Remove the spring housing and • parts of spring. Fit the new spring housing bottom plate must face upward - • slip outer spring loop over lug. Reinstall the rope rotor, tension the rewind spring, fit the fan housing • and secure in position. If the spring pops out of its housing during installation: refit it in the counterclockwise direction, starting outside and working inward.