Stihl FS 110 Product Instruction Manual - Page 33
Fitting the Harness
View all Stihl FS 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
200BA421 KN 200BA422 KN 002BA374 KN described above must be repeated. See also the "Toolless cap with grip" section in the Safety Precautions. Opening the threaded filler cap N Turn the cap counterclockwise until it can be removed from the tank opening. N Remove the filler cap. Refueling Closing the threaded filler cap N Position cap. N Turn the cap clockwise as far as it will go and tighten it as securely as possible by hand. English Fitting the Harness The type and style of the harness depend on the market. The use of the shoulder strap is described in the chapter on "Approved Combinations of Cutting Attachment, Deflector, Handle and Harness". Shoulder strap 1 Take care not to spill fuel while fueling and do not overfill the tank. STIHL recommends use of the STIHL filling 2 system (special accessory). N Put on the shoulder strap (1). N Adjust the length of the strap so that the carabiner (2) is about a hand's width below your right hip. N Balance the brushcutter. FS 110, FS 110 R 31