Stihl FS 450 Instruction Manual - Page 21

Mounting the Bike Handle

Get Stihl FS 450 PDF manuals and user guides View all Stihl FS 450 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

256BA001 KN 256BA002 KN 002BA256 KN English / USA Mounting the Bike Handle 2 A 3 4 8 7 1 1 7 5 9 6 4 9 : Hold the lower clamp (1) steady. : Unscrew and remove the clamp screw (2). : Remove the upper clamp (3) from the lower clamp. Upper and lower clamps are loose once the clamp screw has been removed. : Place the handlebar (4) in the lower clamp (1) so that distance A is no more than 15 cm (6 in). : Place upper clamp in position and press it down. : Fit the clamp screw. : Line up handlebar at right angles to the drive tube. : Tighten down the clamp screw. : Loosen the screw (5), the nut (6) remains in the control handle (7). : Push the control handle - throttle trigger (8) facing the gearhead - onto the handlebar (4) so that the holes (9) line up. : Insert screw and tighten it down firmly. : Go to "Adjusting the Throttle Cable To save space when transporting or storing the machine, loosen the clamp screw and swing the handlebar in line with the shaft, fold the handles down. 20 FS 300, FS 350, FS 400, FS 450, FS 480

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
20
English / USA
FS 300, FS 350, FS 400, FS 450, FS 480
:
Hold the lower clamp (
1
) steady.
:
Unscrew and remove the clamp
screw (
2
).
:
Remove the upper clamp (
3
) from
the lower clamp.
Upper and lower clamps are loose
once the clamp screw has been
removed.
:
Place the handlebar (
4
) in the lower
clamp (
1
) so that distance
A
is no
more than 15 cm (6 in).
:
Place upper clamp in position and
press it down.
:
Fit the clamp screw.
:
Line up handlebar at right angles to
the drive tube.
:
Tighten down the clamp screw.
:
Loosen the screw (
5
), the nut (
6
)
remains in the control handle (
7
).
:
Push the control handle – throttle
trigger (
8
) facing the gearhead –
onto the handlebar (
4
) so that the
holes (
9
) line up.
:
Insert screw and tighten it down
firmly.
:
Go to "Adjusting the Throttle Cable
To save space when transporting or
storing the machine, loosen the
clamp screw and swing the
handlebar in line with the shaft, fold
the handles down.
Mounting the Bike Handle
3
1
2
256BA001 KN
A
4
1
256BA002 KN
9
5
7
8
4
9
002BA256 KN
6
7