Stihl FS 450 Instruction Manual - Page 22
Adjusting the Throttle Cable
View all Stihl FS 450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
002BA163 KN 249BA017 KN Adjusting the Throttle Cable Some machine versions are equipped with a throttle cable adjuster in the control handle. A properly adjusted throttle cable is the precondition for correct operation in the full throttle, starting throttle and idle positions. Adjust the throttle cable only after the unit is fully assembled - the control handle must be in the normal operating position. STOP 2 1 : Press down the trigger interlock (1) and squeeze the throttle trigger (2) (full throttle) - this sets the throttle cable correctly. : Use a suitable tool to push the slide to the bottom of the slot (see illustration). English / USA FS 300, FS 350, FS 400, FS 450, FS 480 21
21
FS 300, FS 350, FS 400, FS 450, FS 480
English / USA
Some machine versions are equipped
with a throttle cable adjuster in the
control handle.
A properly adjusted throttle cable is
the precondition for correct
operation in the full throttle, starting
throttle and idle positions.
Adjust the throttle cable only after
the unit is fully assembled – the
control handle must be in the normal
operating position.
:
Use a suitable tool to push the slide
to the bottom of the slot (see
illustration).
:
Press down the trigger interlock (
1
)
and squeeze the throttle trigger (
2
)
(full throttle) – this sets the throttle
cable correctly.
Adjusting the Throttle Cable
002BA163 KN
STOP
249BA017 KN
1
2