Stihl FS 450 Instruction Manual - Page 40
Sharpening, Metal Cutting Tools
View all Stihl FS 450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Sharpening Metal Cutting Tools 1 2 1 1 2 2 Never attempt to straighten or weld a bent or cracked cutting tool - it might shatter and cause serious or fatal injury. : Resharpen frequently, take away as little material as possible - two or three strokes of the file are usually enough. To avoid out-of-balance: : Resharpen the cutters (1) uniformly - do not alter the contour of the parent blade (2) in any way. : After resharpening about 5 times, have blade checked on STIHL balancer*. 002BA042 KN Grass Cutting Blades, Brush Knife Use a flat file* to sharpen dull cutting grass cutting blades. In case of more serious wear or nicks: Resharpen with a grinder or have work done by STIHL dealer. Chisel Tooth Circular Saw Blades Sharpen as described in the instructions supplied or printed on the inside of the blade's packaging. Scratcher Tooth Circular Saw Blades Use a flat file to file the backs of the teeth until the tips of the teeth are restored to full sharpness. * see "Guide to Using this Manual" FS 300, FS 350, FS 400, FS 450, FS 480 English / USA 39