Stihl FS 450 Instruction Manual - Page 29
Balancing the Machine, Starting / Stopping, the Engine
View all Stihl FS 450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
256BA019 KN English / USA Balancing the Machine Starting / Stopping the Engine 256BA016 KN START 3 STOP 2 1 5 4 6 256BA018 KN 256BA017 KN : Attach machine to the harness. Let it go and check to see how it is balanced - change the attachment point of the spring hook as necessary: Mowing tools (mowing heads, grass cutting blades, brush knives, Shredder blades) should just touch the ground (top illustration). Circular saw blades should "hover" about 20 cm (8 in) above the ground (bottom illustration). Starting : Observe safety precautions - see section "Safety Precautions" in this manual. : Hold down the trigger interlock (1) and squeeze the throttle trigger (2). Keep both levers in that position. : Move the slide control (3) to START and hold it there. : Now release the throttle trigger, slide control and throttle trigger interlock in that order. This is the starting throttle position. : Set the choke knob (4): For cold start to g For warm start to e (Also use this setting if engine has been running but is still cold) : Press the fuel pump bulb (5) at least five times, even if the bulb is still filled with fuel. : Press in decompression valve button (6). Press this button again for each starting attempt. 256BA020 KN 28 FS 300, FS 350, FS 400, FS 450, FS 480