Stihl FS 450 Instruction Manual - Page 24
Mounting the Cutting Tools
View all Stihl FS 450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Mounting the Cutting Tools English / USA 3 8 4 5 6 9 10 7 11 2 1 Blocking the Drive Shaft : Insert the stop pin (1) in the bore (2) in the gearhead as far as stop, apply slight pressure. : Rotate the output shaft until the stop pin slips into position. : Use combination wrench (3) to loosen and unscrew the nut (4) clockwise. : Remove the rider plate (5) and thrust washer (6). The guard ring (7) for mowing applications and guard washer (8) should be fitted to ensure optimum protection from grass cuttings when using mowing tools. Before mounting a circular saw blade: : Remove the guard washer (8) and pull off the thrust plate (9). : Remove the guard ring (7) for mowing applications. : Fit the guard ring (10) for saw blades and the thrust plate. STIHL SuperCut Mowing Head STIHL AutoCut Mowing Head STIHL TrimCut Mowing Head : Block the output shaft with the stop pin. : Screw cutting head counterclockwise onto the output shaft (11) and tighten it down firmly Remove the stop pin. Removing the mowing head : Block the output shaft. : Unscrew the mowing head clockwise. 256BA006 KN 256BA007 KN 256BA000 KN FS 300, FS 350, FS 400, FS 450, FS 480 23