Stihl MS 180 C-BE Product Instruction Manual - Page 26
Cutting Attachment, Mounting the Bar and, Chain front chain, tensioner
View all Stihl MS 180 C-BE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
English Cutting Attachment STIHL is the only manufacturer in the industry to produce its own chain saws, guide bars, saw chains and chain sprockets. A cutting attachment consists of the saw chain, guide bar and chain sprocket. The cutting attachment that comes standard is designed to exactly match the chain saw. Mounting the Bar and Chain (front chain tensioner) Removing the chain sprocket cover 1 2 a 3 t = a : 2 - The pitch (t) of the saw chain (1), chain sprocket and the nose sprocket of the Rollomatic guide bar must match. - The drive link gauge (2) of the saw chain (1) must match the groove width of the guide bar (3). If non-matching components are used, the cutting attachment may be damaged beyond repair after a short period of operation. 001BA191 KN N Unscrew the nut and remove the chain sprocket cover. 1 2 N Turn the screw (1) counterclockwise until the tensioning nut (2) butts against the left end of the housing slot. 207BA009 KN 143BA034 KN Disengage the chain brake. N Pull the hand guard towards the front handle until there is an audible click - the chain brake is disengaged. Fitting the chain Wear work gloves to protect your hands from the sharp cutters. N Fit the chain - start at the bar nose. 143BA003 KN 001BA186 KN 24 MS 170, MS 170 C, MS 180, MS 180 C