Stihl MS 180 C-BE Product Instruction Manual - Page 52
Specifications - weight
View all Stihl MS 180 C-BE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
English Specifications EPA / CEPA The Emission Compliance Period referred to on the Emissions Compliance Label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category A = 300 hours B = 125 hours C = 50 hours CARB The Emission Compliance Period used on the CARB-Air Index Label indicates the terms: Extended = 300 hours Intermediate = 125 hours Moderate = 50 hours MS 180 C Displacement: Bore: Stroke: Engine power to ISO 7293: Idle speed: Ignition System 1.94 cu. in. (31.8 cm3) 1.50 in. (38 mm) 1.1 in (28 mm) 2.0 hp (1.5 kW) at 9,000 rpm 2,800 rpm Electronic magneto ignition (breakerless) Spark plug (resistor Bosch WSR 6 F, type): NGK BPMR 7 A Electrode gap: 0.02 in. (0.5 mm) Fuel System All position diaphragm carburetor with integral fuel pump Fuel tank capacity: 8.5 fl.oz (0.25 L) Chain lubrication Engine STIHL single cylinder two-stroke engine MS 170 Displacement: Bore: Stroke: Engine power to ISO 7293: Idle speed: 1.84 cu. in. (30.1 cm3) 1.45 in. (37 mm) 1.1 in (28 mm) 1.7 hp (1.3 kW) at 8,500 rpm 2,800 rpm Fully automatic, speed-controlled oil pump with rotary piston Oil tank capacity: 4.9 fl.oz (0.50 L) Weight dry, without bar and chain MS 170: MS 180 C with quick chain tensioner: MS 180 C with quick chain adjuster and Easy2Start: 8.6 lbs. (3.9 kg) 8.8 lbs (4.0 kg) 9.3 lbs. (4.2 kg) Cutting Attachment (MS 170) Recommended cutting attachments complying with Section 5.11 of ANSI B 175.1-2000. Observe notes on ANSI B 175.1-2000 and definition of "low kickback chain" in chapter on "Safety Precautions and Working Techniques". Rollomatic E guide bars Reduced kickback STIHL guide bar (with green label) Cutting lengths: 12, 14, 16 in. (30, 35, 40 cm) Pitch: 3/8" P (9.32 mm) Groove width: 0.043 in. (1.1 mm) 3/8" Picco chain Low kickback STIHL saw chain (with green label) Picco Micro Mini Comfort 3 (61 PMMC3) Pitch: 3/8" P (9.32 mm) Drive link gauge: 0.043 in. (1.1 mm) 50 MS 170, MS 170 C, MS 180, MS 180 C