Stihl MS 180 C-BE Product Instruction Manual - Page 36
Versions with Easy2Start
View all Stihl MS 180 C-BE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
English Versions with Easy2Start The Easy2Start stores the energy for starting the chain saw. For this reason, a few seconds may pass between the pulling of the starter rope and the starting of the engine. N With the right hand, pull the starter grip slowly and smoothly - simultaneously press down on the handlebar - do not pull the starter rope out all the way - risk of breakage! N Do not let the starter grip snap back - guide it vertically back into the housing so that the starter rope can rewind properly Starting the chain saw Only versions with decompression valve There must not be anyone within the swivel range of the chain saw. N Press the button, the decompression valve will be opened It is closed automatically when the engine starts for the first time. N For this reason, press the button again before each additional starting procedure 143BA016 KN 143BA017 KN For all versions STOP 0 1 2 N Push the hand guard (1) forwards - the saw chain is blocked N Simultaneously press and hold down the throttle trigger lockout (2) and throttle trigger - set master control lever Position cold start l - If engine is cold (even if the engine has stalled during opening of throttle after starting) Position warm start n - If engine is warm (once the engine has been running for approx. one minute) N Hold and start the chain saw 34 MS 170, MS 170 C, MS 180, MS 180 C