Stihl MS 180 C-BE Product Instruction Manual - Page 37

Once the engine is running - lowe s

Get Stihl MS 180 C-BE PDF manuals and user guides View all Stihl MS 180 C-BE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

When the engine has turned over for the first time STOP 0 3 N Move master control lever (3) to warm start n and continue cranking Once the engine is running STOP 0 3 2 4 N Press the throttle trigger lockout (2) and blip the throttle trigger (4); the master control lever (3) jumps to run F and the engine begins to idle 207BA007 KN 207BA006 KN N Pull the hand guard toward the handlebar The chain brake is released - the chain saw is ready for use. Open the throttle only when the chain brake is off. Increased engine speeds with the chain brake on (saw chain is stationary) will quickly damage the clutch and chain brake. At very low temperatures N Let the engine warm up briefly with the throttle slightly open Switching off the engine 143BA012 KN English If the engine does not start The master control lever was not returned from the position cold start l to warm start n in time, the engine may be flooded. N Move the master control lever to the stop position 0 N Remove the spark plug - see "Spark plug" N Dry spark plug N Crank the engine several times with the starter - to clear the combustion chamber N Replace the spark plug - see "Spark plug" N Set the master control lever to warm start n - even if the engine is cold N Restart the engine N Move the master control lever to the stop position 0 MS 170, MS 170 C, MS 180, MS 180 C 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
MS 170, MS 170 C, MS 180, MS 180 C
English
35
When the engine has turned over for
the first time
N
Move master control lever (3) to
warm start
n
and continue
cranking
Once the engine is running
N
Press the throttle trigger lockout (2)
and blip the throttle trigger (4); the
master control lever (3) jumps to
run
F
and the engine begins to idle
N
Pull the hand guard toward the
handlebar
The chain brake is released – the chain
saw is ready for use.
At very low temperatures
N
Let the engine warm up briefly with
the throttle slightly open
Switching off the engine
N
Move the master control lever to the
stop position
0
If the engine does not start
The master control lever was not
returned from the position cold start
l
to warm start
n
in time, the engine may
be flooded.
N
Move the master control lever to the
stop position
0
N
Remove the spark plug – see
"Spark plug"
N
Dry spark plug
N
Crank the engine several times with
the starter – to clear the combustion
chamber
N
Replace the spark plug – see
"Spark plug"
N
Set the master control lever to warm
start
n
– even if the engine is cold
N
Restart the engine
3
207BA006 KN
STOP
0
4
2
3
207BA007 KN
STOP
0
Open the throttle only when the
chain brake is off. Increased
engine speeds with the chain
brake on (saw chain is stationary)
will quickly damage the clutch and
chain brake.
143BA012 KN