Stihl RMA 370 Product Instruction Manual - Page 17
Connecting Charger to, Power Supply, Charging the Battery
View all Stihl RMA 370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
N Use the height adjusting lever (1) to raise the mower - the lever is pushed forwards. Lower cutting height: N Use the height adjusting lever (1) to push the mower down - the lever is pushed to the rear. N Push the height adjusting lever (1) against the housing until the detents (2) engage. The chosen height setting is indicated by the front detent (3). Connecting Charger to Power Supply Mains voltage and operating voltage must be the same. 2 1 N Insert the mains plug (1) in the wall outlet (2). 3901BA015 KN English Charging the Battery The battery is given a charge of about 30% before leaving the factory. Recommendation: Fully charge the battery before using your power tool for the first time. N Connect the charger to the power supply - mains voltage and operating voltage of the charger must be the same - see "Connecting Charger to Power Supply". Operate the charger only in enclosed and dry rooms at ambient temperatures between 41°F (5°C) and 104°F (40°C). 3901BA009 KN 3901BA019 KN 1 2 A self test is performed after the charger is connected to the power supply. During this process the light emitting diode (1) on the charger lights up green for about 1 second, then red and goes off again. N Push the battery (1) into the charger (2) until you feel noticeable resistance - then push it as far as stop. RMA 370 15