Stihl RMA 370 Product Instruction Manual - Page 20
Light Emitting Diodes LED, on Charger
View all Stihl RMA 370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
English 2) During operation: Power tool cuts out - allow battery to cool down; it may be necessary to take the battery out of the power tool for this purpose. 3) Electromagnetic interference or fault. Take the battery out of the power tool and refit it. Switch on the power tool - if the light emitting diodes still flash, the battery is faulty and must be replaced. 4) Electromagnetic interference or fault. Take the battery out of the power tool and refit it. Switch on the power tool - if the light emitting diodes still flash, the power tool is faulty and must be checked by a servicing dealer - STIHL recommends an authorized STIHL servicing dealer. Light Emitting Diodes (LED) on Charger 1 The light emitting diode (1) lights up green or flashes red. Green continuous light ... ... means the following: The battery - is being charged - is too hot and must cool down before it is charged See also "Light Emitting Diodes (LED) on Battery". The green light emitting diode on the charger goes off as soon as the battery is fully charged. 3901BA019 KN Red flashing light ... ... means the following: - No electrical contact between battery and charger - remove and refit the battery - Faulty battery - see also "Light Emitting Diodes (LED) on Battery". - Charger faulty - have checked by a servicing dealer. STIHL recommends a STIHL servicing dealer. 18 RMA 370