Stihl RMA 370 Product Instruction Manual - Page 19
English
View all Stihl RMA 370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
During Charging Process The light emitting diodes glow continuously or flash to indicate the progress of charge. During charging the capacity that is currently being charged is indicated by a green flashing light emitting diode. During Operation The green light emitting diodes glow continuously or flash to indicate the state of charge. 80 - 100 % English If the red light emitting diodes glow continuously / flash 0 - 20 % 60 - 80 % 20 - 40 % 40 - 60 % 3901BA016 KN 3901BA016 KN 3901BA017 KN 40 - 60 % 20 - 40 % 60 - 80 % 80 - 100 % When the charging process is completed, the light emitting diodes on the battery go off automatically. If the light emitting diodes on the battery flash or glow red - see "If the red light emitting diodes glow continuously / flash". 0 - 20 % If the light emitting diodes on the battery flash or glow red - see "If the red light emitting diodes glow continuously / flash". 1 light emitting diode glows continuously red: 4 light emitting diodes flash red: 3 light emitting diodes glow continuously red: 3 light emitting diodes flash red: Battery is too hot1) 2)/cold1) Fault in battery 3) Power tool is too hot - allow it to cool down. Fault in power tool 4) 1) During charging process: Charging process starts automatically after the battery has cooled down / warmed up. RMA 370 17