Symphonic SC720FDF Owners Manual - Page 30

DVD SECTION CHANGING THE DVD SET UP ITEMS B DISPLAY SETTING 4 Use [K / L] to select an item, then press [ENTER]. SETUP DISPLAY TV MODE STILL MODE 4:3 LETTER BOX AUTO • TV MODE: QUICK You can change certain aspects of the DVD display screens and on-screen messages on the TV screen. • 4:3 LETTER BOX (default): To show black bars on top and bottom of the screen. SETUP DISPLAY TV MODE 4:3 LETTER BOX 4:3 PAN & SCAN • 4:3 PAN & SCAN: To show a full height picture with both sides trimmed. NOTE: • You can access this setting directly by selecting "QUICK" at step 2 on page 29. • STILL MODE: This function allows you to adjust picture resolution and quality in the still mode. • AUTO (default): Automatically select the best SETUP STILL MODE AUTO FIELD FRAME DISPLAY resolution setting (FRAME or FIELD) based on the data characteristics of the pictures. • FIELD: Select "FIELD" when the pictures are still unstable even if "AUTO" is selected. FIELD stabilizes the pictures, although the picture quality may become coarse due to the limited amount of data. • FRAME: Select "FRAME" to display relatively motionless pictures in higher resolution. FRAME improves the picture quality, although it may unstabilize the pictures due to simultaneous output of two field data. 5 Press [SET-UP] to exit the menu. C AUDIO SETTING Choose the appropriate Audio settings for your equipment as it only affects during the playback of DVD discs. 4 Use [K / L] to select an item, then press [ENTER] repeatedly until your desired setting appears. SETUP AUDIO DRC DOWN SAMPLING DOLBY DIGITAL ON ON BITSTREAM • DRC (Dynamic Range Control): • ON : To compress the range of soft to loud sound. (default) • OFF : Output the original sound. • DOWN SAMPLING: • ON : Output in 48kHz. (default) • OFF : Output the original sound. NOTE: • When playing a disc with copyright protection, the sound will be output at 48kHz even if the setting is "OFF". • DOLBY DIGITAL: QUICK • BITSTREAM: Output a Dolby Digital signal. (default) • PCM: Convert the Dolby Digital to PCM. (2 channel stereo) NOTES: • You can access this setting directly by selecting "QUICK" at step 2 on page 29. • Set to "BITSTREAM" when the unit is connected to a Dolby Digital Decoder. 5 Press [SET-UP] to exit the menu. D PARENTAL SETTING This feature allows you to set the rating level of your DVD discs. Playback will stop if the disc ratings exceed the level you set. PARENTAL LEVEL 4 Enter four-digit password with the Number buttons, then press [ENTER]. SETUP PARENTAL PASSWORD Please enter a 4-digit password. NOTE: • Enter any 4 digits (except for 4737) to set the password for the first time, and record it for your memory. 5 Use [K / L] to select "PARENTAL LEVEL", then press [ENTER]. SETUP PARENTAL PARENTAL LEVEL ALL PASSWORD CHANGE 30 EN