Symphonic VP19WFA Owner's Manual - Page 11
Video, Cassette, Information
View all Symphonic VP19WFA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
VIDEO CASSETTE TAPE INFORMATION This VCP will operate with any cassette that has the VHS mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. PRECAUTIONS INSERTING A CASSETTE • Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place. Before using a tape with these conditions, to avoid damage of the tape and the VCP, wait until the tape has warmed to room temperature and the moisture has evaporated. • Avoid extreme heat, high humidity and magnetic fields. Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the VCP. The VCP will automatically turn on. • Do not tamper with the cassette mechanism. • Do not touch the tape with your fingers. Window CORRECT THREE DIFFERENT TAPE SPEEDS Before recording, select the tape speed from : SP mode (Standard Play), LP mode (Long Play) or SLP mode (Super Long Play). The table below shows the maximum recording/playback time using T60, T120 or T160 tapes in each mode. 60 WRONG Tape Speed Recording/Playback Time Type of tape T60 T120 T160 SP mode 1 hour 2 hours 2-2/3 hours LP mode 2 hours 4 hours 5-1/3 hours SLP mode 3 hours 6 hours 8 hours REMOVING .4 CASSETTE 1) In the Stop mode, press the EJECT button on the remote control or press the STOP/EJECT button on the VCP. The cassette will be ejected. 2) Pull the cassette out of the cassette compartment. 3) Store the cassette in its case as shown. EN 9J 13